ISO 13665-1997
|
ID： |
5580A5B80A35431B86009200057B6033 |
|
文件大小(MB)： |
0.17 |
|
页数： |
7 |
|
文件格式： |
|
|
日期： |
2013-6-9 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
INTERNATIONAL STANDARD ISO 13665,国际标准 第一版 First edition,1997-05-01,无缝、焊接压力钢管——管体表面缺陷磁粉检测,Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube,body for the detection of surface imperfections,This material is reproduced from ISO documents under International Organization for,Standardization (ISO) Copyright License number IHSIICC/1996. Not for resale. No part of these,ISO documents may be reproduced in any form, electronic retrieval system or otherwise, except as,allowed in the copyright law of the country of use, or with the prior written consent of ISO (Case,postale 56, 1211 Geneva 20, Switzerland, Fax +41 22 734 10 79), IHS or the ISO Licensor's,members.,Reference number,ISO 13665:1997(E),Foreword,ISO (the International Organization for Standardization) is a worldwide federation of national,standards bodies (ISO member bodies). The work of preparing International Standards is normally,carried out through ISO technical committees. Each member body interested in a subject for which,a technical committee has been established has the right to be represented on that committee.,International organizations, governmental and non-governmental, in liaison with ISO, also take,part in the work. ISO collaborates closely with the International Electrotechnical Commission,(IEC) on all matters of electrotechnical standardization.,Draft International Standards adopted by the technical committees are circulated to the member,bodies for voting. Publication as an International Standard requires approval by at least 75 % of,the member bodies casting a vote.,International Standard ISO 13665 was prepared by Technical Committee ISO/TC 17, Steel,Subcommittee SC 19, Technical delivery conditions for steel tubes for pressure purposes.,前言：,国际标准化组织（ISO）是由各国标准化团体（ISO 成员团体）组成的世界性联合会。制定,国际标准的工作通常由ISO 的技术委员会完成，各成员团体若对某技术委员会确立的项目,感兴趣，均有权参加该委员会的工作。与ISO 保持联系的各国际组织（官方的或非官方的）,也可参加有关工作。在电工技术标准化方面，ISO 与国际电工委员会（IEC）保持密切合作,关系,由技术委员会通过的国际标准草案提交各成员团体表决，需取得至少75%参加表决的成员,团体的同意，才能作为国际标准正式发布,本标准 ISO 13665 由ISO/TC17 技术委员会（钢），附属委员会SC 19（压力钢管交货技术条,件）制定,. ISO 1997,All rights reserved. Unless otherwise specified, no part of this publication may be reproduced,or utilized in any form or by any means, electronic or mechanical, including photocopying and,microfilm, without permission in writing from th……
……